A.M.P.I. Master-8 Bedienungsanleitung PDF herunterladen (Seite 7)

Example 3: To set channel #5 in the DC mode -

Press: ‘DC 5 ENTER’

Channel #5 is now in the DC mode, it is time independent and delivers a continuous pulse. You can

manually stop and start the pulse by pressing ‘5’ (channel number)

Example 4: To turn off all the channels -

Press keys : ‘OFF,ALL,ENTER’.

8. Setting Parameters

To set the time parameters (DURA, DELAY or INTER), first press the selected parameter key and then

the desired time.

Example : To set the duration of channel 6 to be 52 msec (52 x 10

-3

sec, the time is given in seconds).

Press keys: ‘DURA,6’

(the previous duration is displayed. If the duration time has never been set, the sign ‘FFFF FF’ is

displayed).

Press keys : ’52,ENTER,3,ENTER’. (‘3’ for msec)

For your convenience it is recommended to use only exponents of 6 ( µsec), 3 (msec) or 0 (sec).

- e.g. 52 msec can be inserted also as 0.052 x 10

sec, or 5.2 x 10

-2

sec, or 5200 x 10

-5

sec etc.

Note :

The new parameter becomes operative, the instant you press the last ENTER.

8.1 Using the ‘ -’ and ‘ ¯’ Keys

You can increase or decrease each time parameter using the ‘ -’ and ‘ ¯’ keys.

Example:

Press keys: ‘DURA,6’.

1 - Introduction

file:///D|/users/benny/master8.htm (7 of 14) [07/04/2002 12:32:07]

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

A.M.P.I. Master-8 Bedienungsanleitung Seite 7